Assemble your Grid Tiles on a clean, dry, flat, and level surface with adequate space around the course. Avoid steep slopes, uneven or slippery terrain, stairs, ledges, pools, roads, and other hazards. Keep the area free of clutter and tripping obstacles.

Never stand, walk, run, sit, or jump on Grid Tiles, turf, borders, ramps, or obstacles. These components are designed for putting, not to support body weight. Walk around the course to take your shots. Stepping on components may cause slipping, breakage, or injury.

Use only the lightweight foam golf balls included with your GridGolf kit. Do not use hard golf balls, plastic practice balls, or other hard projectiles. Never intentionally hit balls toward people, pets, windows, or fragile objects.

Use the putter for low, controlled putting strokes only. Never take full golf swings or swing toward another person. Maintain clearance from players, spectators, pets, and objects. Check that the adjustable putter is securely assembled and locked before play. Do not use it as a walking support or to strike other objects.

Before play, attach the included non-slip rubber pads to the bottom corners of each Grid Tile as directed in the setup instructions. Make sure the pads are clean, firmly attached, and in contact with the playing surface. Stop play and reposition the course if components shift or separate.

GridGolf is recommended for ages 6 and up. Children should be supervised by an adult during setup, play, and teardown. Keep loose accessories and any small components away from children who may put them in their mouths. Follow the warnings and age guidance on your product packaging.

Check tiles, interlocks, borders, obstacles, non-slip pads, and the adjustable putter for damage, loose connections, or instability before each use. Do not play with cracked, broken, or unstable components. Contact GridGolf support if you need assistance with replacement parts.

GridGolf is intended for temporary outdoor play, not permanent installation. Stop play during lightning, rain, or slippery conditions. Keep the kit away from open flames, grills, heaters, traffic, and hazardous areas. Do not leave an assembled course where it could create a tripping hazard.

Routine cleaning: Remove dust, pet hair, and debris with a lint roller, soft brush, or gentle handheld vacuum.

Spot cleaning: Use a damp cloth and mild soap solution. Avoid bleach, solvents, harsh cleaners, abrasive scrubbers, and pressure washing.

Drying: Let turf and components dry completely before packing.

Bring the kit indoors after temporary outdoor use. Avoid prolonged exposure to direct sunlight, heavy rain, standing water, and extreme heat. If the tiles become damp from grass or dew, wipe the undersides and allow all components to air-dry in a shaded, ventilated location before storage.

Gently disconnect Grid Tiles, borders, and accessories following your setup instructions. Do not force, twist, or yank interlocking pieces apart. Store the kit in its carrying bag in a cool, dry indoor location. Avoid hot vehicle trunks, unconditioned attics, direct sunlight behind glass, and heavy objects placed on top of stored components.

Periodically inspect the turf, tiles, borders, connectors, ramp, obstacles, pads, foam balls, and putter for wear or damage. Keep connecting surfaces clean and free of debris. Stop using damaged or unstable parts and contact support to discuss replacements.